logo
01
Position:
Homepage
>
>
>
How to use temperature controller to achieve real energy saving

How to use temperature controller to achieve real energy saving

  • Categories:Trend News
  • Author:
  • Origin:
  • Time of issue:2020-07-30
  • Views:0

(Summary description)In the national clean heating "coal to electricity" initiative, more and more families use electric heating, how to save energy has become a concern of many people. In addition to building insulation, temperature control is one of the key to energy saving. Some users who have installed electric heating always turn on the thermostat when they need it and turn it off when they go out, thinking that this will save electricity. In fact, it will not only save energy but also consume more energy. So how to use the thermostat to achieve real energy saving?

 

 

Misunderstanding 1. Instant energy saving?

 

Turn on the thermostat when necessary and turn it off when going out, which will consume energy. Electric heating system is a low temperature operation system. It has good heat storage property. It takes a certain time to make the room temperature reach the set temperature after the system is turned on, but the indoor temperature will not drop rapidly after the system is turned off. It also takes a long time for the temperature to rise again when it is opened again. Frequent switching not only can not save energy, but also increase the operating cost of heating system.

 

Correct usage:

  In a room that is not commonly used, the temperature can be lowered by a few degrees by the temperature controller. When leaving the room for a long time, the temperature of the temperature controller can be reduced by a few degrees. In the case of long-term absence of people or leaving for a long time, the system can be turned off. However, it should be noted that if there is equipment in the room that is afraid of freezing damage, it is also necessary to open it to a certain temperature to prevent the equipment or pipeline from freezing and cracking.

 

 

 

 

Mistake 2. The higher the set temperature of the thermostat, the faster the temperature rise?

Some users feel that the room temperature is low and they need to heat up quickly to set the temperature of the thermostat to the highest. This practice is also wrong.

The heating time of room temperature depends on the indoor and outdoor temperature difference and the installed power per unit area of the room. When the installation power and the indoor and outdoor temperature difference are fixed, no matter how many degrees are set, the time for the room to rise to the temperature you need is the same.

If the room is now 16 degrees and you want to make the room temperature rise to 18 degrees, in this case, setting the room temperature to 18 degrees or 20 degrees, 25 degrees is the same as heating to 18 degrees.

 

Correct usage:

 

Set as many degrees as you need, or use an intelligent thermostat, which can automatically calculate the opening time of the thermostat in advance.

How to use temperature controller to achieve real energy saving

(Summary description)In the national clean heating "coal to electricity" initiative, more and more families use electric heating, how to save energy has become a concern of many people. In addition to building insulation, temperature control is one of the key to energy saving. Some users who have installed electric heating always turn on the thermostat when they need it and turn it off when they go out, thinking that this will save electricity. In fact, it will not only save energy but also consume more energy. So how to use the thermostat to achieve real energy saving?

 

 

Misunderstanding 1. Instant energy saving?

 

Turn on the thermostat when necessary and turn it off when going out, which will consume energy. Electric heating system is a low temperature operation system. It has good heat storage property. It takes a certain time to make the room temperature reach the set temperature after the system is turned on, but the indoor temperature will not drop rapidly after the system is turned off. It also takes a long time for the temperature to rise again when it is opened again. Frequent switching not only can not save energy, but also increase the operating cost of heating system.

 

Correct usage:

  In a room that is not commonly used, the temperature can be lowered by a few degrees by the temperature controller. When leaving the room for a long time, the temperature of the temperature controller can be reduced by a few degrees. In the case of long-term absence of people or leaving for a long time, the system can be turned off. However, it should be noted that if there is equipment in the room that is afraid of freezing damage, it is also necessary to open it to a certain temperature to prevent the equipment or pipeline from freezing and cracking.

 

 

 

 

Mistake 2. The higher the set temperature of the thermostat, the faster the temperature rise?

Some users feel that the room temperature is low and they need to heat up quickly to set the temperature of the thermostat to the highest. This practice is also wrong.

The heating time of room temperature depends on the indoor and outdoor temperature difference and the installed power per unit area of the room. When the installation power and the indoor and outdoor temperature difference are fixed, no matter how many degrees are set, the time for the room to rise to the temperature you need is the same.

If the room is now 16 degrees and you want to make the room temperature rise to 18 degrees, in this case, setting the room temperature to 18 degrees or 20 degrees, 25 degrees is the same as heating to 18 degrees.

 

Correct usage:

 

Set as many degrees as you need, or use an intelligent thermostat, which can automatically calculate the opening time of the thermostat in advance.

  • Categories:Trend News
  • Author:
  • Origin:
  • Time of issue:2020-07-30
  • Views:0
Information

In the national clean heating "coal to electricity" initiative, more and more families use electric heating, how to save energy has become a concern of many people. In addition to building insulation, temperature control is one of the key to energy saving. Some users who have installed electric heating always turn on the thermostat when they need it and turn it off when they go out, thinking that this will save electricity. In fact, it will not only save energy but also consume more energy. So how to use the thermostat to achieve real energy saving?

 

 

Misunderstanding 1. Instant energy saving?

 

Turn on the thermostat when necessary and turn it off when going out, which will consume energy. Electric heating system is a low temperature operation system. It has good heat storage property. It takes a certain time to make the room temperature reach the set temperature after the system is turned on, but the indoor temperature will not drop rapidly after the system is turned off. It also takes a long time for the temperature to rise again when it is opened again. Frequent switching not only can not save energy, but also increase the operating cost of heating system.

 

Correct usage:

  In a room that is not commonly used, the temperature can be lowered by a few degrees by the temperature controller. When leaving the room for a long time, the temperature of the temperature controller can be reduced by a few degrees. In the case of long-term absence of people or leaving for a long time, the system can be turned off. However, it should be noted that if there is equipment in the room that is afraid of freezing damage, it is also necessary to open it to a certain temperature to prevent the equipment or pipeline from freezing and cracking.

 

 

Mistake 2. The higher the set temperature of the thermostat, the faster the temperature rise?

Some users feel that the room temperature is low and they need to heat up quickly to set the temperature of the thermostat to the highest. This practice is also wrong.

The heating time of room temperature depends on the indoor and outdoor temperature difference and the installed power per unit area of the room. When the installation power and the indoor and outdoor temperature difference are fixed, no matter how many degrees are set, the time for the room to rise to the temperature you need is the same.

If the room is now 16 degrees and you want to make the room temperature rise to 18 degrees, in this case, setting the room temperature to 18 degrees or 20 degrees, 25 degrees is the same as heating to 18 degrees.

 

Correct usage:

 

Set as many degrees as you need, or use an intelligent thermostat, which can automatically calculate the opening time of the thermostat in advance.

Scan the QR code to read on your phone

Related Information

ZHONGSHAN LONGDE ELECTRICAL CO.,LTD

Add:No.88 Tanbei East Second Road,Dongsheng Town,Zhongshan City,528425 China
Tel:
+86-760-22213283
Fax:+86-760-22228618
E-mail:
longdepg@163.com

QR

Scan QR Code

Copyright © Zhongshan Longde Electrical Co.ltd  2020 All rights reserved     粤ICP备13088412号